Heavy Equipment Operation Toolbox Talk
Learn the basic safety principles around how to operate heavy equipment on the jobsite.
Heavy Equipment Operation Safety Talk
When using heavy equipment of any sort, there comes risks and hazards. It is important to educate yourself on what these risks are, in order to be as safe as possible. Being an operator of these types of machinery, you should always follow protocol and only use them as intended.
Using these machines in irresponsible manners can lead to injuries or fatalities. It is important that the person who is operating heavy equipment has the proper certifications and training to do so. Within this article, we will discuss the safety steps, the hazards that apply, and what you can do to avoid accidents.
Heavy Equipment Hazards
There are hazards that come along with jobs sometimes, and operating heavy machinery is one that does. That is why proper training and caution are to be taken when you are using them or around them. Some of the hazards that you should be aware of that can happen are explained below.
Leaks of any sort can happen with heavy equipment. Most of the time, the areas that you are working on need to be kept tidy. When leaks happen, it is important to always clean up the mess and not leave it.
2. Contact With Power Lines
To be as safe as possible, heavy machinery should be kept at least 10 feet away from any power lines and poles. This is going to help the chances of hitting one at a minimum. You should also keep in mind that you have to be aware of voltages as well. The higher they are the further away from them you should stay.
3. Struck-By Hazards
There are so many records that have been taken about the struck-by instances that happen with heavy machinery. It can cause anything from minor injuries to serious ones, and even fatalities. It is referred to as being in the “line of fire”. The people who are spotting or standing by are at the highest risk for being struck-by heavy equipment.
4. Equipment Failure
Proper inspection of the machine before usage is important to try and keep malfunctions from happening while running the machine. Equipment that fails during use can pose as a risk for injuries. It can be due to hydraulic failures or something else.
5. Property Damage
Property damage while using heavy equipment can happen very easily, that is one reason proper walk around inspections should be done. This is an accident that can be avoided and can make employers have to pay out extra money. The damages can range from cars that were not seen by the operator to buildings being hit.
How To Safely Operate Heavy Equipment
When you are an operator of a piece of heavy equipment, it is important to do so responsibly. It is a machine that can harm people or do damage to objects if not done correctly. Following the safety practices that have been given to you is advised.
Doing thorough inspections of your heavy equipment before use is important. Make sure that all areas are working correctly and there aren’t any obvious problems. You should never run equipment if a problem is found, it can result in damage to something or even someone getting hurt.
2. Inspect Surroundings
Before you begin running one of these pieces of equipment, you should do a full walk-around of your machine. This will ensure that everything is intact and there isn’t any debris or objects that are going to be in your way. Walking around the equipment should never be skipped.
3. Training and Certification
Improper use of these machines is dangerous. You can not just assume that you can run them without training. There are certain certifications and training that is needed to operate them. In the training, you will learn the safety protocols and be familiar with the equipment that you are running.
Operating heavy machinery is just like driving a vehicle, you should always wear your seatbelt. It can help you in case an incident occurs. There should be seatbelts inside and a rollover protection system as well. Rolling over in one of these machines can be bad, you need to make sure you have the needed protection in the chance that it happens.
5. Clean Work Area
When you are operating your heavy equipment, it is important to make sure that the area you are working in is tidy and clean. It can save you from accidents happening. When you are trying to work around a lot of objects in your work area, you are more likely to have trouble.
Safety Tips On A Construction Site
Being safe and cautious on a construction site is important. There are so many hazards that can happen, it is important to do what you can to avoid them from happening at all times. By doing this, you are going to do your part to keep yourself and those around you safe. Some helpful tips to remember are:
Following the safety regulations are going to reduce the chances of injuries or death. There is always still a chance of accidents happening, even when using all the safety precautions given.
See how this toolbox talk works in the app
• Choose from a pre-loaded library (or upload your own)
• Schedule and assign topics for any project
• Store digital attendance sheets in one place
There’s an easier way to find and give toolbox talks—try it free for 15 days.